Haltech Title
INFORMATION
This page is for information about the various engine management systems that HALTECH offer.
Information courtesy of HALTECH.
Last Updated : 27th July, 1999

Halwin Screenshots
Halwin is the new programming software under development to replace the old DOS software. It has many new features over the old software including 3D Map viewing , on-screen "gauges" , and many more.....

IT IS NOT AVAILABLE YET, SO PLEASE DO NOT ASK FOR ANY MORE INFORMATION FROM EITHER ME OR HALTECH.

  Screenshot 1 - 3D Fuel Maps
  Screenshot 2 - 3D Ignition Maps
  Screenshot 3 - 3D Ignition Maps , different view angle
  Screenshot 4 - Engine Data Gauges
 

Patch Update
A patch update file has been released to fix the problem of a runtime error on some fast 200MHz+ machines trying to run the programming software.

   Download :  TPPATCH.ZIP   9k

Extract the file to your Haltech directory where the programming software   .EXE  file is located. After extraction you must go to the DOS prompt then go to the same directory as the .EXE file and type in :
TPPATCH FILE.EXE
Where FILE.EXE is the name of your Haltech software.
For instance , is you have E6A software and the file is called  E6A.EXE  , then you would type in TPPATCH E6A.EXE and the patch will run itself which takes a few seconds.
If you have any difficulty then do not hesitate to email or ICQ me about it.
 

Haltech F9 / F9-A Fuel Computer
The Haltech F-9 is a fuel only engine management system suited to engines that already have their own ignition system , such as older EFI engines that still run a distributor.

   Click HERE for more Information on the Haltech F9
 

Haltech E6-A Fuel / Ignition Computer
The Haltech E-6a is a comprehensive fuel and ignition engine management system for the professional or enthusiast. It is suited to modern multiple ignition coil engines or custom made engine conversions.

   Click HERE for more Information on the Haltech E6-A

Haltech E6-S Fuel / Ignition Computer
The new E6-S is a redesign of the existing E6-A with a few major updates. Controlling both Fuel and Ignition systems it is the complete solution for your engine management needs.

   Click HERE for more information on the Haltech E6-S

Haltech E6-GM Fuel / Ignition Computer
The Haltech GM is a comprehensive fuel and ignition engine management system with a direct plug-in setup for Delco computer equiped cars. Offering the same levels of adjustment as the E6-A it is a perfect solution for modified vehicles running the Delco. See the E6A information linked below.

   Click HERE for more Information on the Haltech E6-GM

Haltech IG5 Ignition Computer
A stand-alone ignition management system. Basically the ignition-side only of the E6 systems it is perfect for those wishing to update at a later date from a fuel-only system.

   Click HERE for more information on the Haltech IG5

Haltech HaligatorTM  *Not available yet. Still under development*
The Haligator is an electronic programmable boost controller and extra injector fueller.

   Click HERE for more information on the Haligator

PLEASE NOTE THAT THIS PRODUCT IS NOT AVAILABLE YET !  DO NOT TRY TO CONTACT ME OR HALTECH REGUARDING THE HALIGATOR AS NO MORE INFORMATION WILL BE GIVEN , AND YOU WILL GENERALLY MAKE US PISSED OFF WITH YOU !

Demo Software
A DEMO version of the Haltech programmable software is now available for download. Just unzip the file and run the DEMO.EXE file. Hit "Y" to go online as this demo version has a simulated running engine so you can see how it all works. To see the menus on which are on top, hold down the ALT key and then hit the corresponding first letter for that menu, eg. ALT-F to bring up the FILES menu. You can also download some of my basic sample maps that may help point you in the right direction at the bottom of this page.

    Download DOS Demo Software : HALDEMO.ZIP
 

Haltech Installation
Click HERE to see how to install a Haltech F9
 

Latest Version Information
15th October, 1997 : The E6-A and F9-A are currently on V4.1, which is an update from V2.55.  This allows the one Version of software to communicate with both the old ECUs and the newer Series 2 ECUs.
Thanks Justin @ Haltech.

1st October, 1998 :Damn , this has been a long time since I updated this page. Sorry about that !  Latest version of the programming software and firmware are as follows.

25th July, 1999.  Patched versions of the software

    E6-A and E6-GM are at V5.05
    E6-S is at V5.05
    F9 and F9-A are at V5.05
    F3 and F7-C stopped at V5.4
    IG5 is at V1.4

Haltech are hard at work at creating newer systems , so check back here every now and again to see what is new. This page will be updated more often from now on ...  promise...  I really mean it....
 

MAP Database
Here I am starting a database for saved MAPS. If you have any MAPS running on your car that you are extremely happy with please email them to me and I will include them here for others to download and try. Please send a short description of the motor and any mods you have done to it , along with what version software you are using.

Click HERE to go to the Database.
 

 Haltech HQ
Haltech have moved in to their new modern premises. Take a look...


Reception     * Note that the secretary is hiding behind the desk. Click the picture above to see her *


All the hard working guys in the workshop.


Doing some development work on new ECU designs using a Toyota V8.